Quote:
Originally Posted by SCOTI
Technically yes they could be relocated & re-purposed. I would only do it if the bracket material is @ least frame thickness @ a minimum.
The relocation fab work needs to be done well to support the spring & shock load(s).
|
Thanks, Scoti
The 60-62 OEM shock bracket is extremely stout so I'm pretty sure it'll do the job. I'm interested in a 20 x 12 rear wheel with a Mickey Thompson 6620 (nearly 15 inch section width) but it won't fit with the stock outboard shock configuration. The other alternative is to use a frame crossbar with shock tabs welded on. Just brainstorming for now. Thanks again.