Quote:
Originally Posted by Jon01
What all is involved in wiring up one of those switches from LS1Nova?
I'd love to have cruise for road trips, my setup is DBW if that makes any difference.
The harness has cruise, decel and accel already broken out.
|
If your harness already has wires labeled for cruise it's simple. One wire will be hooked to an ignition 12v source and the other three will go to your wires coming out of your harness (they actually go to the TAC module, but you don't need to know that if they're labeled
) They will be on/off, set/coast and resume/accel.