Alright here is what I have :
First photo is the new 4x4 steering box
second new and old arm however the new arm has too small of a
hole to fit the new steering box? Supposedly they were paired so napa says.
3rd and 4th is the steering arm and position.
I have all the new bits to connect the steering box to the steering arm but not the correct arm off the steering box yet.
Ill purchase the modified steering arm from the member that posted if that would save me some time modifying my current one.
As far as the engine is concerned I have all the necessary brackets to mount the pump and the alternator which is almost done. My main concern is getting the new steering box to the steering arm
Any help would be greatly appreciated.