Quote:
Originally Posted by Captainfab
Driving the PS pump off of the generator is going to turn the pump slower that I would have been in it's original application.
The installation instructions that come with my power steering box adapter plate, give you a dimension where to cut if you are reusing the original flange. However since you will be using the tube and flange, I would cut the shaft 1-2" above that. The tube part of the tube and flange is 6" long.
|
this brings up a interesting question captainfab. I'd like to put power on my trk also. the alt. is already on the drivers side and putting the pump over there also seems like it would pull harder on the one side of the waterpump bushing.I think I can go off the crank but still seems like all the pressure is on one side. ya think it's ok or should a guy move the alt. to the pass. side ?