|
Re: 62 c20 power steering / 235 - need some smart people.
Spent a couple hours messing around fabbing up a bracket for the power steering pump tonight. Cut the bracket out of some 3/16" flat stock. I welded a 3/8" i.d. machine bushing(s) on the back side of each hole. The thermostat housing has a slight recess in the house so the bushing is needed to space it out correctly. The bottom is needed, but more to keep the spacing the same. I will try to get some pics of that next time I take it off.
I clamped the pump on with a vice grip. Once I had it where I wanted it I tacked it in place. Then took it off and welded it up hard front and back.
|