Re: 62 c20 power steering / 235 - need some smart people.
Took a piece of 3/16" x 1.25 flat stock. Bolted it up to the 2nd manifold bolt. Heated an area right above the bolt and did a bit of a custom bend over to the mount on the original pump bracket. After it was bent I cut the bracket and then made a tab, bolted it up and welded it up solid.
Pump is pretty rock solid now. Still plan on making a bracket from the top factory mount down to the base of the flat stock. Should really make it rock solid.
I don't think there will be a ton of belt contact on the generator pulley but it should still work.
Matt
|