[buckroseau]

Spent some serious time on the power steering project today. Trying to take quite a few photo's of this. Not a ton of info on 62 and earlier installs.

As far as I can tell the stock steering box is the same as the 63 and later models. The blueprint I got from Captainfab with the plate I bought from him shows the stock holes. The plate pretty much laid over the top exactly like his template. I think the main difference is the width of the frame as you move towards the back...it gets narrower. As you can see in one of the pics the top rear hole on the plate, about half of it is above the frame.

Started off painting some marks on the frame of the steering shaft column line and the center shaft line of the steering box.