The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10

67ChevyRedneck · 07-19-2007, 11:45 AM

On the truck itself, you need to remove the hood latch assembly from the truck. 4 bolts and it's off.

The instructions say to drill out the two dimples at the bottom of the radiator for the bottom bolts for the condenser assembly, but my holes were already there!

You need to use the bolts with rubber mounts for the bottom, the rubber part goes on the engine side.

When I went to install my condenser, I saw that the bolt holes wouldn't line up, so I drilled out the holes some, problem solved!

Reinstall your hood latch assembly putting the condenser bracket between the core support and the hood latch assembly.

07-19-2007, 11:45 AM	#33
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10 On the truck itself, you need to remove the hood latch assembly from the truck. 4 bolts and it's off. The instructions say to drill out the two dimples at the bottom of the radiator for the bottom bolts for the condenser assembly, but my holes were already there! You need to use the bolts with rubber mounts for the bottom, the rubber part goes on the engine side. When I went to install my condenser, I saw that the bolt holes wouldn't line up, so I drilled out the holes some, problem solved! Reinstall your hood latch assembly putting the condenser bracket between the core support and the hood latch assembly. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 07-19-2007 at 11:48 AM.