View Single Post
Old 07-25-2007, 01:18 PM   #47
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10

The last thing to do is install the 3/8x5" bolt that goes thought all 3 bracket pieces and is the pivot point for the Compressor.

You have to install the nut at the end of the bracket (have it ready) before you push the bolt all the way though. You can not get the nut in place if you push the bolt all the way through first.

Snug the 3/8" lock nut down, but not too tight that you can't rotate the A/C compressor.

You also need to install the adjuster nut for the Compressor. Using a 3/8x1" bolt, flat washer and lock washer, put it through the slotted bracket and bolt it into the bracket behind it. There is a nut welded onto the bracket behind it. Snug it up for now so that the compressor doesn't flop around.

You can now tighten down all of your bolts, don't forget to do this
Attached Images
  
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!

Last edited by 67ChevyRedneck; 07-25-2007 at 01:19 PM.
67ChevyRedneck is offline