|
Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10
If you have a non-air cab like I did, you need to cut some holes!
Vintage Air provides you with templates for the holes.
You simply tape them in place and cut away!
I did find out that using their templates, that they should be adjusted some. They need to move down and away from the dash a little bit because they are put on the curve of the dash, lesson's learned! I think that if you move it down about 1/4" and away from the dash about 1/8" that should get you into the flatter area of the cab!
|