The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10

67ChevyRedneck · 09-21-2007, 03:33 PM

Last hose! WOHOOO!!!!1

This is the big one, the #10 discharge hose. Put the grommet on the hose FIRST!

Install a #10 rubber O ring gasket on both ends of the hose and put plenty of the supplied lubricant on them.

Put the hose through the loose firewall cover.

Loosely install the hose onto the underdash unit and A/C compressor. Once you have the hose turned the way you want it, tighten down the fittings on both the A/C compressor and the underdash unit. Again, it's hard to get to the underdash unit, but it can be done

09-21-2007, 03:33 PM	#81
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10 Last hose! WOHOOO!!!!1 This is the big one, the #10 discharge hose. Put the grommet on the hose FIRST! Install a #10 rubber O ring gasket on both ends of the hose and put plenty of the supplied lubricant on them. Put the hose through the loose firewall cover. Loosely install the hose onto the underdash unit and A/C compressor. Once you have the hose turned the way you want it, tighten down the fittings on both the A/C compressor and the underdash unit. Again, it's hard to get to the underdash unit, but it can be done Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-21-2007 at 03:34 PM.