Hmmmmm, so what's next?
I guess it's time to finish up the wiring! I drilled a small hole through the firewall cover for my wiring. You could run it over by the fuse box and then over, but I thought, what the heck, just drill a hole
(You can do the same for the power wire too, as you'll see in a minute, but you'll probably need more wire...)
You need to run the blue wire from the A/C thermostat through the hold in the dash to the engine bay and then hook it up to the binary compressor safety switch we installed on the #6 hardline earlier.
there is also a "loose" blue wire with the kit. This wire needs to go from the binary compressor safety switch to the black wire coming out of the compressor. The blue wires simply push onto the binary switch and the blue and black wires push together at the compressor. Simple
