Quote:
Originally Posted by JayMc46
Looks like you are ALL IN, got to get Kathy a ride for the power tour.
|
Jay, my man!! Decided to quit lurking and hitch a ride. Now you need to put together a build thread for Big Red! We're definitely "all in" for the final push. Kathy always liked this one best anyway ...big back seat.
By the first of 2004, the project Chevy was gone and I'd acquired a rotisserie for the bodywork. I upgraded the plan a bit and stripped the chassis down to the bare frame and repainted it after removing the fuel cell and etc. Came by a partially completed stainless fuel tank and finished it out to mount under the trunk floor. I added a stiffening rib to the rear housing and had all the suspension parts blasted clean (third time) and powder coated with Anthracite and gloss clear.
I had two 9" Ford rear disc setups, one from a Town Car and the other from a Versailles. The rear setup was easy peasy, but the front took a bit more engineering. I'd heard you could swap in Granada spindles and their front disc setup, but wasn't sure if the wheel location and steering would stay the same. "The Google" was still in it's infancy, so rather than buy more junk for a science project, I decided to make the junk I had work. Machined my own o-ring plugs to eliminate the e-brake mechanism and engineered the brackets to bolt onto the '57 stock spindle. Voila! Four wheel disc brakes.