The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 '55-'59 Task Force trucks with V8 Swap, What Radiator Hoses?

nikwho · 06-06-2021, 06:23 PM

Hey guys,
I did the No Limit Camaro IFS swap on my truck. Kept the original Camaro engine mounts (so engine is LOW). I need to figure out what radiator hoses to run. I've been running generic flexible hoses, but looking for something that is actually a decent fit. I may just go dig through hoses at NAPA until I find something, but curious if anyone has part numbers from a comparable swap? My radiator is a 24" x 19, with return hose at upper drivers side. I swapped to a serpentine belt setup and that old flex hose rubs on the high drivers side mount alternator and is going to cause a problem.

06-06-2021, 06:23 PM	#1
nikwho Registered User Join Date: Apr 2010 Location: Flagstaff, AZ Posts: 974	'55-'59 Task Force trucks with V8 Swap, What Radiator Hoses? Hey guys, I did the No Limit Camaro IFS swap on my truck. Kept the original Camaro engine mounts (so engine is LOW). I need to figure out what radiator hoses to run. I've been running generic flexible hoses, but looking for something that is actually a decent fit. I may just go dig through hoses at NAPA until I find something, but curious if anyone has part numbers from a comparable swap? My radiator is a 24" x 19, with return hose at upper drivers side. I swapped to a serpentine belt setup and that old flex hose rubs on the high drivers side mount alternator and is going to cause a problem. Attached Images __________________ '59 Apache - 383" SBC/TH-350 '68 GMC - BBC/TH400 Last edited by Rickysnickers; 06-07-2021 at 10:02 AM.