|
Re: Upside down, back to front, long low 63 fleet
Trouble is Ive never driven it so I wont really know if theres been a change.
With all the changes planned I wouldnt be able to pinpoint credit but hopefully its a big improvement overall.
A few pics now of the finished crossmember. From the fill in pieces beside the spring towers you can get an idea of the angle of the mounting.
I also noticed the pigtail pocket in the lower a arm was the lowest point at my ride height. So I cut out the bottom of the spring pocket, removed a bit of the pocket and then re-attached the bottom piece at about 180 degrees rotation. That gets the pigtail bulge out of ground clearance issues.
|