Chilly day yesterday, possibly the first one this year.
Weather has been so mild to date, so dropping to @pauly territory meant I had three T-shirts and one of my garage hoodies on to protect my chest and prevent couching and spluttering.
So when I built the carport, I knew that at some point I may want to add a curtain to cut the breeze and even hold in some “HEAT”
First job was drilling pilot holes, and then adding these coach screws, a 3/4 box of which cost me about £2.00 at a bootfair last year.
New impact driver working nicely, the drill being a pain in the butt releasing the drill bit constantly.
Once the canvas was measured as the holes are individually spaced, screws were in, it was time to hook and hang the truck curtain side to see how it fits before @nickwheeler came around midday to help me do the rear brakes on the Rezin Rockit.
Of course it is way too big, so I guess a bit of folding and tucking will be in order.
Looking over from the neighbours yard, it is obvious that there is a 4 foot gap from the left side.
This can be fixed……. Or not.
Due to folding under and raound some beam ends it is a bit slack.
I think it will work well along with the space heater later in winter and for now it is folded, packed and put away.
Small steps.
I also raked up,a load of leaves, cut the grass and pulled some dead bits from the side beds.