The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

brimc · 07-22-2013, 08:28 PM

So now that I got my pictures up-loaded, time for an update from the past several days! I got a good 2 coats of POR15 on my new engine cross member after sanding it all down with a 60 grit flap disk.

I think it turned out alright. Next time I would rather use a good saw and angle finder to make perfect cuts. The seams and welds would look better, even though it is under the truck you can see it real good behind the tire in the wheel well.

07-22-2013, 08:28 PM	#61
brimc Registered User Join Date: Jun 2013 Location: New Lowell, Ontario, Canada Posts: 248	Re: 86 Silverado K20 12V CUMMINS Build So now that I got my pictures up-loaded, time for an update from the past several days! I got a good 2 coats of POR15 on my new engine cross member after sanding it all down with a 60 grit flap disk. I think it turned out alright. Next time I would rather use a good saw and angle finder to make perfect cuts. The seams and welds would look better, even though it is under the truck you can see it real good behind the tire in the wheel well. __________________ BRIAN 1986 Chevrolet K20 Silverado 12 Valve CUMMINS P Pumped Intercooled/Getrag360/Divorced NP205/10B/14BFF Detroit Locker - DD Canadian Winter Beater. My Chevrolet CUMMINS Build http://67-72chevytrucks.com/vboard/s...d.php?t=585509