The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bbalch404 · 05-08-2017, 01:10 PM

Thanks Larry! That was my original thought, that or the rear frame from No Limit. I am going to heavily modify the frame so I am not looking for a full stock rear frame, and mine is good everywhere except for parts of the frame rail. Each side has some rust on the bottom of the C channel and some on the vertical part. But the entire thing is not rusted. Can I just cut the rust out, back to good metal and then weld good metal in and then reinforce?

05-08-2017, 01:10 PM	#4
bbalch404 Registered User Join Date: Sep 2016 Location: Cornelius, NC Posts: 8	Re: Frame Rust Thanks Larry! That was my original thought, that or the rear frame from No Limit. I am going to heavily modify the frame so I am not looking for a full stock rear frame, and mine is good everywhere except for parts of the frame rail. Each side has some rust on the bottom of the C channel and some on the vertical part. But the entire thing is not rusted. Can I just cut the rust out, back to good metal and then weld good metal in and then reinforce?