View Single Post
Old 03-01-2011, 08:33 PM   #66
eagleuh1
Registered User
 
eagleuh1's Avatar
 
Join Date: Jul 2009
Location: Russellville, Arkansas
Posts: 1,699
Re: LS swappers, post up your pics!!

Its a flush and fill tee, that I drilled a hole in and forced a barbed hose fitting through and jb welded to seal it to the cap. I can take the cap on and off the tee, hose is held on with FI hose clamp. This goes in one of the heater hoses up high on the inner fender. Works good for cheap fix.
eagleuh1 is offline   Reply With Quote