View Single Post
Old 12-22-2020, 07:41 PM   #114
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: Doing LS Swap - I have no idea what I'm doing!

Quote:
Originally Posted by EagleChief View Post
Looking at this oil pan kit from Jegs: https://www.jegs.com/i/GM+Performanc...QAvD_BwE#qaTab

Anyone used it, or know for sure if it will fit in the trucks?
I've used that pan in a couple of trucks. I make my own engine mounts, so take that into consideration, but it usually hangs down roughly 1/2" below the crossmember. That pan is about an inch to inch and a half or so shallower than the stock truck pan. You also won't be able to get both bottom bellhousing bolts to bolt into it, which is fine, so don't freak out about that.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote