|
Re: TH400 Questions
Quote:
Originally Posted by ThreeQuarter
Good idea on the seal replacement. I don’t have any crocus cloth, how does that compare to the abrasive pads I use to clean copper pipe before I solder it? I think those are the least coarse option I have on hand. I don’t mind buying something locally, but it looks like I’d have to order crocus cloth online and wait for it to arrive.
The spline and yoke mate up very nicely—no play or wear at all.
I think I will change the trans fluid. Seems like there must be a level inside the case where all TH400s have to be filled to—I wonder what that is so I can see if my dipstick is at the same level.
|
If you are talking about scotch brite pads, that should do the trick.....or I have also used a 400 grit wet /dry paper , followed with a 600 grit . As long as the rust is off & smooth, you will be fine  Longhorn 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|