The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - New Brakes, It would be nice if they worked, 67 GMC

Mike C · 10-15-2021, 09:43 PM

I’d start by inspecting the rear brakes again. Making sure the pads are appropriate for the drum size (diameter and width) and that they are adjusted out as far as they will go. Check for leaks at all 4 corners as well as the center line in the rear. After replacing all the other parts, you may want to look at the combination valve as being bad.

10-15-2021, 09:43 PM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,713	Re: New Brakes, It would be nice if they worked, 67 GMC I’d start by inspecting the rear brakes again. Making sure the pads are appropriate for the drum size (diameter and width) and that they are adjusted out as far as they will go. Check for leaks at all 4 corners as well as the center line in the rear. After replacing all the other parts, you may want to look at the combination valve as being bad. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax