Quote:
Originally Posted by TX3100Guy
That is a really good question. The bed was on but not the fenders. To ensure that the spacer I purchased was going to work, I remounted one side and took measurements. There is another 2 inches from the current wheel/tire to the outside edge of the wheel well. The 1 1/4" spacer should work out fine. Also, the bottom edge of the wheel well is about an inch above the top of the tire, so I should be fine. Thanks for the heads up!
|
I looked up your smoothies on their website.
They certainly ain’t cheap.
A 16x7 would be the way to go but still not a gaurentee they’d fit either. Sometimes the wheel is designed different when you swap to larger sizes.
And if you changed to a different rim style like the cragars, still no gaurentee they’d fit.