|
Re: Project "Man Pedal"
Drove her today, still need to finish a few things. Here's a couple pics. The SM465/NP208 combo is going in, that way I will have a longer front driveshaft. All the ORD stuff was perfect. U-bolts front (with studs) and rear and the rear spring plates and perches. I used a 3" steering block, but I am going to go crossover, hopefully by the end of the summer. Going to keep the tires at about 36" or less.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.
1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|