Ordered some shock mount bolts from Summit, pretty beefy studs and less than $12 each. They have a 9/16" mounting bolt so I drilled out the 1/2" holes in the lower control arms and shock re-locators.
Picture with part number for anybody that's needing to get some.
Checked the mounting position.
That factory shock mount location with the bump had to go, so I cut it out and welded a plate in place.
I welded the bracket on instead of bolting it.
I have a few of the fittings I need to start running the air lines so I bent the tube for the bag. Going with aluminum line and AN fittings, I have some bulkhead 90's in transit. Cheapest place I found online was
www.anplumbing.com if anybody knows of a cheaper place feel free to let me know. Jeg's and Summit were both about 15% higher than this place.
That's all I've gotten done hopefully more in the next few days.