[1oldtimer]

Also to put a Saginaw o/d in place of the old 3 spd you need to modify either the shift arms or the shift rods. I had one in my old '64 panel and I modified the shift arms. The last pic is the bracket I made to hold the cable and toggle switch. Ford repos an overdrive cable that has a solid handle and the right thick wire. If your going to an o/d from no o/d you will need to shorten the driveshaft and lengthen the speedo cable (I had an extension made). I finally found another Saginaw o/d to put into my '56 panel.