More progress.
Finished the bracket to locate the transfer case shifter a few inches back. Not my prettiest work, but it's solid.
First coat of lizard skin sound deadening is down. Looks pretty good, but It took a bit to get is to spray evenly.
I did a test spray and it was a little clumpy until I leaned out the nozzle.
This is the nozzle position I used for final coats that sprayed evenly. I ended up doing a light first coat, let it dry and then did a very heavy coat. 1 gallon did the cab floor, firewall and a small portion of the rear cab. If you want it thick 1 gallon will not do it. Tomorrow I will spray 2 coats of the ceramic insulation.
