The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Getting up the nerve to tackle A/C, need to remove the old

*randy500* · 08-30-2019, 11:02 AM

The j nuts that remain good, i run a tap through them on a drill then oil them, makes assembly much easier. Barely start all bolts upon assembly till you have them all started otherwise the fender tweaks and one or a few might not line up. The 2 straight up bolts can be almost screwed all the way in since they hold the fender up and get the hole alignment happening.

08-30-2019, 11:02 AM	#15
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Getting up the nerve to tackle A/C, need to remove the old The j nuts that remain good, i run a tap through them on a drill then oil them, makes assembly much easier. Barely start all bolts upon assembly till you have them all started otherwise the fender tweaks and one or a few might not line up. The 2 straight up bolts can be almost screwed all the way in since they hold the fender up and get the hole alignment happening.