[Cash3481]

Here is what I used!
1. Number 2 with a wool bonnet to cut the oxidation and clean the paint for waxing. This took a while and a few applications to clean the junk off the paint.
2. I also experimented with a clay bar too and used it after the wool bonnet to get anything still left on the truck before waxing it.
3. I used foam pads for the number 6 and did 2 applications one with a medium foam bonnet and then wit a very soft foam bonnet.
4. (I have not done this yet)
I'll be finishing it off with the number 9 swirl remover. Not sure that's the best path but it seem to be working so far.