View Single Post
Old 04-21-2020, 04:55 PM   #2
skyphix
Registered User
 
Join Date: Sep 2018
Location: Hampden, ME
Posts: 406
Re: Hydroboost hose to a rack and pinion ... hose to -6AN fitting?

You should be able to get a 16mmx1.5 or 18mmx1.5 to -6AN fitting easily enough from any vendor that sells those sorts of things. Then its pretty simple to make high pressure capable hoses that should work.

I'm not sure if hot rod fuel hose might have something like that, but I know I was able to find a 16mm x 1.5 to -6AN at Summit.


I am not sure if the hydroboost pumps used were the same then as they are on the LS-series engines, but the hydroboost pump on my 5.3 used 16x1.5 at the high pressure port in the pump.
__________________
Eric
1980 C10 SWB
2003 Chevy Suburban 2500 LT

Last edited by skyphix; 04-21-2020 at 05:12 PM.
skyphix is offline   Reply With Quote