The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

litew8 · 07-15-2011, 02:45 PM

Got some pictures after the truck was blasted. I think it turned out good, all things considering. He said I had quite of bit of "black rust" on the underside of the driver's side trailing arm, in between the affixed plate on the bottom side. The rust has warped the trailing arm a little, and has eaten through the trailing arm some. I'll have better pictures later.

The other issue - a pin sized hole opened up on the passenger's side/rear brake line.

07-15-2011, 02:45 PM	#14
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	blasting Got some pictures after the truck was blasted. I think it turned out good, all things considering. He said I had quite of bit of "black rust" on the underside of the driver's side trailing arm, in between the affixed plate on the bottom side. The rust has warped the trailing arm a little, and has eaten through the trailing arm some. I'll have better pictures later. The other issue - a pin sized hole opened up on the passenger's side/rear brake line. Last edited by litew8; 07-15-2011 at 03:02 PM.