Thread
:
1940 Packard 120 Convertible Restoration
View Single Post
02-19-2015, 01:04 PM
#
100
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,870
Re: 1940 Packard 120 Convertible Restoration
Front passenger side pan. This side had an extra cut out for a small transmission inspection cover.
I didn't show the body mount area on the drivers side pan earlier. Made it the same way, pre-stretched then used the bead roller. I used a 5/8" round bead to make the straight lines and the 1/4" offset dies. I spaced one of the offset dies out to match the rounder 5/8 bead.
Distortion from pre-stretching.
Both pans finished, ready for final trimming and fitting.
Compared with the C2C pans.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
theastronaut
View Public Profile
Find More Posts by theastronaut