The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Roll'nSlo · 04-07-2014, 11:05 PM

Ok, here's my game plan now. Going to go with a 461 with a set of aluminum oval port 270 heads with 12:1 CR. I've always been planning on head studs. Cam, roller lifters, roller rockers and push rods will come after I talk to the machine shop. Headers I'm going to try to use the ones I have. Intake and carb will come after I'm done with everything else. I'm just curious which would be better timing gears or chain.

04-07-2014, 11:05 PM	#35
Roll'nSlo Registered User Join Date: Jan 2014 Location: Plantersville,TX Posts: 130	Re: Another 489bbc question Ok, here's my game plan now. Going to go with a 461 with a set of aluminum oval port 270 heads with 12:1 CR. I've always been planning on head studs. Cam, roller lifters, roller rockers and push rods will come after I talk to the machine shop. Headers I'm going to try to use the ones I have. Intake and carb will come after I'm done with everything else. I'm just curious which would be better timing gears or chain.