Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10
Be sure to use hose clamps and put the hoses on the underdash unit. Top to top, bottom to bottom. Also, make sure the hose clamps are on BEFORE you put the hoses over the fittings, it's a very tight fit and they're not easy to get on after the hoses are on. Tighten down the hose clamps. Leave 'em loose on the other ends for now.
You may have to slightly bend the tubing so that it will line up with the hole in the cab (I had to) just do it very slowly and carefully! I only had to move it about 1/4" up (you can see how close the hoses are to the bottom of the opening.)
Last edited by 67ChevyRedneck; 09-21-2007 at 03:28 PM.
|