[Rowdyaf]

Alright now i need some help, i dont know what i did wrong, and because of it i have a couple questions.

Let me start with saying eventually i will do the body work and paint, for now i just want a driver that is 1 color.

So i sprayed my first coat of Epoxy white primer this weekend. I heated my shop up to 70, shut down the fire heaters mixxed up my primer 4:1:1 like the guy who sold it to me instructed.My problem is the white turned yellow/egg shell.

I Used all High teck brand primer/hardener/reducer.
I have never used a paint gun and im a little stumped. when i mixxed the paint with hardener/reducer the hardener almost looked like mapel syrup it was clear and brown but it wasnt thick. when i mixxed it with the primer/reducer it was almost a cream color in the gun, but when i sprayed it on it was white. It didnt start to turn yellow till after it was drying. Hopefully someone has a idea to point me in the right direction, till i figure out what i did wrong im not going to put on any more coats.