The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 60x frame motor mounts after cross member swap

**LostMy65** · 05-16-2022, 01:43 PM

On your 60-62 frame, you can use 67-72 V8 mounts.
Or if you use 63-66 mounts, you'll have to use a 1/2 inch spacer between the top rail of the frame to the underside of the top portion of the motor mount stand/perch.
Here's mine with 63-66 stands/perches.

.
Here's another post from another thread:
http://67-72chevytrucks.com/vboard/s...69#post5427669

05-16-2022, 01:43 PM	#4
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,482	Re: 60x frame motor mounts after cross member swap On your 60-62 frame, you can use 67-72 V8 mounts. Or if you use 63-66 mounts, you'll have to use a 1/2 inch spacer between the top rail of the frame to the underside of the top portion of the motor mount stand/perch. Here's mine with 63-66 stands/perches. . Here's another post from another thread: http://67-72chevytrucks.com/vboard/s...69#post5427669 Attached Images __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 05-16-2022 at 01:59 PM.