|
Re: Power window harness boot installation
Here's how I mounted mine. Your first pic might pinch the loom. I cut hole a little lower on the door compared to the pillar structure on the cab, so that the loom ended up more vertical when the door is closed...provides a little more slack in the harness to prevent too much tension on the harness.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside
Pontiac 462 ci, Kauffman D-Port alum. heads
4L80E, narrowed sheetmetal Ford 9-inch
Tubular front and rear suspension
Custom 6-piston front disc and 4-piston rear disc brakes
|