The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phantom dually · 03-01-2005, 11:14 PM

Update just got a set of DJM 2" drop spindles. Ordered a set of Belltech 3" front coil springs and a set of DOESTECH nitro slammers. Also ordered a complete front end rebuild kit with all Polygraphite bushings from PST. Looks like I have some work ahead of me. I talked to the guy who is going to set up my rear ladder bar setup and he said to get the front where I wanted it to sit. SO here I go again. I really think this project will be a little more focused than my 83 project. There are so many more aftermarket parts available for the 88-98 that are proven to work. IMO.

03-01-2005, 11:14 PM	#16
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Update just got a set of DJM 2" drop spindles. Ordered a set of Belltech 3" front coil springs and a set of DOESTECH nitro slammers. Also ordered a complete front end rebuild kit with all Polygraphite bushings from PST. Looks like I have some work ahead of me. I talked to the guy who is going to set up my rear ladder bar setup and he said to get the front where I wanted it to sit. SO here I go again. I really think this project will be a little more focused than my 83 project. There are so many more aftermarket parts available for the 88-98 that are proven to work. IMO. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 11-07-2005 at 10:44 PM.