Quote:
Originally Posted by Palf70Step
Great looking fit to me. Not sure about your laws, but it would pass pretty much anywhere here that has a law about it.
|
Thanks Bill,
Been having that exact discussion here.
Always a killjoy telling you how bad you are, breaking rules etc.
I don’t care.
99% of police would not be bothered, and if you do not behave like an idiot on the road, that goes up to 100%
If push comes to shove.....
Add small deflectors or trims.
[quote author="@welshpug" source="/post/2554315/thread" timestamp="1575059332"]i don't recall what offset the 7" wheels should be on this platform so I went with 50
https://www.willtheyfit.com/index.ph...8-5&offset2=36
The Mercedes wheels are ET36 for the 8.5 and 34 for the 7.5, a 234 45 will work ok on an 8" wide wheel and be nigh on identical to the diameter of the original wheel, just a bit extra poke there as you have seen.
I would get them bolted on and weight on them as they might tuck in at the top as the suspension moves up.
Edit, I found a set like yours on ebay, ET59
https://www.willtheyfit.com/index.ph...8-5&offset2=36
That explains the poke ! an extra 42mm of wheel on the outside but the inner face sits nigh on in the same place within a mm or 3.[/quote]
THIS..........
LOOKS LIKE PRETTY DECENT NEWS.