The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Making a stock height truck handle a little better

Ziegelsteinfaust · 09-07-2021, 08:29 PM

I always run turn downs on trucks for more mid range. So I am not sure if it fits over the axle with a sway bar, but I do know a spare makes it harder.

What I would do is get another cross member that you can mod in your free time. Do what ever you dreamed of, and swap it in when convenient with you. Then you could use polyurathane bushings, and have it all done pretty quick.

Stock height does not mean it handles poorly. Quality tires, and shocks polish turds very well. Then you can try dialing in spring rates. All items are a few hours work max.

That is my plan on my 83 step.

Other plans I have are probably above what your looking for as I intend to change alot of stuff for minimal changes.

09-07-2021, 08:29 PM	#4
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,561	Re: Making a stock height truck handle a little better I always run turn downs on trucks for more mid range. So I am not sure if it fits over the axle with a sway bar, but I do know a spare makes it harder. What I would do is get another cross member that you can mod in your free time. Do what ever you dreamed of, and swap it in when convenient with you. Then you could use polyurathane bushings, and have it all done pretty quick. Stock height does not mean it handles poorly. Quality tires, and shocks polish turds very well. Then you can try dialing in spring rates. All items are a few hours work max. That is my plan on my 83 step. Other plans I have are probably above what your looking for as I intend to change alot of stuff for minimal changes.