Thread: Dead
View Single Post
Old 02-18-2021, 09:07 AM   #3
crsgmc
Registered User
 
Join Date: Apr 2018
Location: Carpenter, Wyoming
Posts: 83
Re: Dead

I read your reply and it got me thinking. The crank position sensor is new (two years and maybe 10000 miles). I replaced it when I put the new engine in. The way that it died, was like you threw a switch, one second it was running fine the next it was dead. What got me thinking was when you try to start it, it goes really fast and then stumbles. Not like it is about to start, but sounds like diesel engine. Sitting on the edge of the ramp, I thought it sounded like the timing was way off. I checked all the wires from distributor and made sure the distributor had not come loose. I am thinking it might be the crank position sensor, I will check for spark and remove the crank position sensor and look for testing procedure. Has anyone had a bad crank position sensor, What were the symptoms. Thanks for the reply.

Last edited by crsgmc; 02-18-2021 at 09:30 AM.
crsgmc is offline   Reply With Quote