|
Re: Dynatech MuscleMaxx Headers
nope...didn't have to notch a thing...but if I don't replace my motor mounts with solid mounts and a mid plate.... I'll need to trim them just slightly on the tubes that have the "Dynatech" tab welded to them.
That said...if I moved the motor all the way back against the firewall they'd clear fine.
__________________
Kurt -
'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...
my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
Last edited by 68GMCCustom; 02-12-2011 at 01:01 AM.
|