[big_dan]

Thanks for following, fellas. Continuing along, my next step is to verify if ride height is where I want it. I'll be running an 18x8 with a 245/40 up front and a 20x10 with a 275/40 in the rear. So, I snipped out a set of mockup "wheels" to see where we're at. I'll ponder on it a bit, but it looks like I'll end up going about 2" lower. There's a few ways to get there, but right now I'm leaning towards dropping the cab and core support to get there. Yes, the front looks like ride height is higher, but it's even. But, pic's or it didn't happen, so .......

Thanks for looking -

Dan