The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

blacknwhitedog · 12-12-2021, 10:45 PM

Has anyone had experience with these. They are thinner than the stock spacers and allow more stud length for shims. Currently my truck has 2.5 drop spindles and 2” shorter springs. Alignment right now is .25 positive camber and 1 degree positive caster. Since these are thinner I’m thinking I can gain some caster and move the camber to zero or slightly negative. Right now I only have one or two shims behind the control arm shafts.j

12-12-2021, 10:45 PM	#1
blacknwhitedog Registered User Join Date: Mar 2012 Location: Sonoma CA Posts: 55	POL upper a arm spacers Has anyone had experience with these. They are thinner than the stock spacers and allow more stud length for shims. Currently my truck has 2.5 drop spindles and 2” shorter springs. Alignment right now is .25 positive camber and 1 degree positive caster. Since these are thinner I’m thinking I can gain some caster and move the camber to zero or slightly negative. Right now I only have one or two shims behind the control arm shafts.j Attached Images Last edited by blacknwhitedog; 12-14-2021 at 06:10 PM.