The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**cwcarpenter98** · 12-08-2021, 07:18 PM

I bought these a while ago, but finally had a chance to start the caster mod. My dad and I don't have a working drill press, but my adopted church family in Milly has one. Thankfully, he had a 5/8" drill bit. We had it set to 620 rpms and with plenty of cutting fluid, new holes were drilled fairly quickly. The drill press is definitely the way to go

12-08-2021, 07:18 PM	#893
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Frankentruck I bought these a while ago, but finally had a chance to start the caster mod. My dad and I don't have a working drill press, but my adopted church family in Milly has one. Thankfully, he had a 5/8" drill bit. We had it set to 620 rpms and with plenty of cutting fluid, new holes were drilled fairly quickly. The drill press is definitely the way to go Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson