[mongocanfly]

So to finalize the hoses , I needed the tank installed
I was afraid I was gonna run into clearance issues , and i did
When i redid all the tank fittings and sending unit, i knew they stuck up higher than the original
And sure enough, it did...the tank fits snug up against the floorboard, and all this held it off that by around a inch ..spacing the tank down wasnt a option due to the fill neck going up thru the cab corner..
So I had to do what I didnt want to...cut a hole in the floorboard
Now it fits..
I'll make a cover to go over this..it will also be helpful if I ever need to do any work on the fittings or sender..