[jmarkha1]

Got the paint on and had enough to go over some of the tricky spots again to make sure I had as good a coverage as I could.

With a bit of adjustment on the fluid volume and fan angle the paint went on quite nicely - nice wet coats.

It was quite orange peely but did settle down well.

It has a semi gloss finish which is good in my book for a frame.

3rd photo - you might be able to spot the bit Wiltshire flies sat in the paint!

Will let it dry for at least a day before attempting to start bolting bits to it.

Next batch of painting will be the trailing arms, crossmembers and other bit suspension stuff...