The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**1rippen6** · 08-20-2021, 08:58 AM

That piece is not reproduced, I may have a good used one I'll sell but will have to look. The rod clips at the handle I can't find either, they have a tab that is straight. Everything online had a 90 tab so I've been using on door rod clips. There's a left and right in the doors you just need to figure out which one works best. Also, some of the tabs are longer than others so that comes into play sometimes.

08-20-2021, 08:58 AM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,711	Re: Hatch repair, where do I get these parts That piece is not reproduced, I may have a good used one I'll sell but will have to look. The rod clips at the handle I can't find either, they have a tab that is straight. Everything online had a 90 tab so I've been using on door rod clips. There's a left and right in the doors you just need to figure out which one works best. Also, some of the tabs are longer than others so that comes into play sometimes.