[lmdangerous]

Nick,
For the record the backing plate bolt pattern for the 1/2,3/4, and 1 ton are all the same . Reason I used the speedway brackets as a pattern. Yea I know an expensive pattern. I thought the 1/2 ton bracket would work - and it would have but it wasn't far enough from the spindle center line to clear the rotor and mount the calipers.The 3/4 ton caliper is also a little bigger and the space between the caliper bolts is a little bigger. I also used two 3/8 thick plates over lapped to get ride of all the spacers. LMD