Re: 68 C50 Looongbed pickup build
Another weekend with less accomplished than I had hoped. So when I had said several posts back that I had all of the rivets out that I could get to, prior to pulling the cab there were actually still 5 holding on the front shackles for the rear springs. Each shackle has two connectors coming in from the bottom, for some reason the one on the driver side had one rivet and one bolt. And then there was one on each side that the leaf spring was in the way of. I decided to go ahead and completely finish that end of the truck prior to pulling sheet metal. So I pulled out the big guns and lifted it up and set it down on some jack stands:
|